Or browse by topic.
Both drop-in cooktops and slide-in cooktops can be used in an island, peninsula or a traditional setting. The main difference is that a drop-in cooktop will have the controls on the top while the slide-in will have them on the front. A slide-in cooktop will require special installation.
A slide-in range is designed to slide in and fit flush with your countertop. This is ideal for an island peninsula, and can also be used in a regular setting to showcase a decorative backsplash. With a slide-in range, cooktop and oven controls are at the front of the appliance. A freestanding range is used in traditional installations (against the kitchen wall), and typically has a backsplash with a clock and controls that are on the front, the top, or the backsplash.
A BTU is the amount of heat required to raise the temperature of one pound of water 1˚F. BTUs are used as a measurement of the heating power of gas cooktops or ovens. To decide how much BTU capacity you’d like in your appliance, consider the following:
For cookware to work on an induction surface, it must be magnetic and have a completely flat bottom. In general, most stainless steel and cast iron cookware will work. Here's a simple test: Try sticking a magnet to the bottom of your pan. If the magnet sticks, that cookware should work; if it doesn’t, most likely the cookware is not compatible with an induction cooktop surface.
Smudge-Proof™ is a protective coating that is applied directly to the stainless steel appliance that resists fingerprints and cleans easily, making it effortless to keep your kitchen looking beautiful.
Each gas range has a shut-off valve, which supplies gas to the surface burners. To check that this valve is open and working, follow these steps:
When the tab on the valve is facing right, your range should work.
The light will stay on until the cooktop has cooled down.
To self-clean your oven, follow these simple steps:
Note: For safety reasons, the oven door will remain locked until the oven cools down. When it is sufficiently cool, the door will automatically unlock.
To close an open door when it’s in the locked position and the door is open, press and hold the oven door light switch while following these simple steps:
You should then be able to close the door.
If you have cast iron grates, follow these steps:
If you have porcelain-coated grates, simply place them in the dishwasher and coat any unfinished areas with a thin layer of cooking oil after washing.
Keep your burner components clean by using a mild nongranular cleaner, such as ammonia or a degreaser. This will ensure that the gas ports do not get blocked. When putting the parts back together, always make sure the burners and caps are level and firmly set in place.
We recommend our Cerama Bryte cleaner, which is specialized for our products. You can purchase a complete cleaning kit from our Frigidaire web page, found in the accessories section of the site.
To keep your oven racks gliding smoothly when you’re removing or inserting them, we recommend applying cooking oil along their outer edges.